Tilta Nucleus-M WLC-T03无线遵循焦点/镜头控制系统（部分套件I）
The Nucleus-M is a revolutionary and highly customizable 3-channel wireless lens control system. It allows you to have full control of focus, iris, and zoom on either the FIZ hand unit or between the two wireless hand grips. You can even split control of the channels between the hand unit and wireless hand grips as you see fit with the push of a button.
The wireless range of both the hand unit and hand grips is 1,000 feet and with the planned upcoming transmission upgrade, the range can reach up to 1 ¼ miles! This makes it ideal for drone or car-mounted shots.
The hand grips can be attached to the included rosette mounts for handheld operation and can also be attached to top bar-based gimbals with the included Nucleus-M Hand Grip to Gimbal Adapters or to ring-based gimbals with the optional Nucleus-M Hand Grip Universal Gimbal Ring Adapters.
Each motor has its own built-in motor drive that communicates directly with the hand unit and hand grips. This negates the need to mount a separate MDR to your rig, allowing for a more compact camera setup and a quicker setup time. Simply set the motors and hand unit/hand grips to the same channel and you will have full control.
The motors are designed to clamp onto 19mm or 15mm rods (with the included rod bushings). This clamp-on design allows you to easily attach and detach the motors without needing to remove any other accessory from your setup. Every motor has a 0.8 mod, 35 tooth, 32 pitch gear attached, which is the standard gear size for cinema lenses. The torque of the Nucleus-M Motor at 14.8V is 2.5N·m
核-M是革命性和高度可定制的3通道无线镜头控制系统。它允许您完全控制Fiz手机单元或两个无线手柄之间的焦点，虹膜和缩放。您甚至可以在按下按钮时拟合手机单元和无线手柄之间的频道的控制。【·······手动夹具的无线范围是1000英尺，并使用计划即将到来的传输升级，范围最多可达1‰英里！这使其成为无人机或车载镜头的理想选择。【·······施用手柄夹具可以附着在包括手持式操作的附带的玫瑰花座安装上，也可以用包含的核-M手握到万向节的顶部杆的万向节。适配器或与圈的Gimbals具有可选的核心握把通用万向节环适配器。【········每个电机都有自己的内置电机驱动器，直接与手机单元和手柄夹持。这否定了将单独MDR安装到钻机的需要，允许更紧凑的摄像头设置和更快的设置时间。只需将电动机和手部/手握到同一个通道即可，您将完全控制。【·········电机设计用于夹在19mm或15mm棒上（附带的杆衬套）。此夹紧设计允许您轻松连接和分离电机，而无需从您的设置中删除任何其他配件。每个电机都有0.8 mod，35齿，32个螺距齿轮，这是电影镜片的标准齿轮尺寸。 14.8V的核-M电机的扭矩为2.5N·m